Strut Services Group, Inc.

Unistrut Alabama

P1062-P2490

$

P1062 / P1063 / P1064 / P1964 / P2471 / P2490
Square Washer (1-5/8″ Series)

Part No. Rod Size Hole Diameter Nom. Pipe Size Finish Product Weight / Piece (lbs)
P1062 5/16″ 11/32″ 11/32″ EG 0.18
P1062 5/16″ 11/32″ 11/32″ HG 0.191
P1062 5/16″ 11/32″ 11/32″ GR 0.18
P1062 5/16″ 11/32″ 11/32″ ZD 0.18
P1062 5/16″ 11/32″ 11/32″ SS 0.18
P1062 5/16″ 11/32″ 11/32″ ST 0.18
P1062 5/16″ 11/32″ 11/32″ AL 0.06
P1063 3/8″ 7/16″ 7/16″ EG 0.18
P1063 3/8″ 7/16″ 7/16″ DF 0.191
P1063 3/8″ 7/16″ 7/16″ HG 0.191
P1063 3/8″ 7/16″ 7/16″ GR 0.18
P1063 3/8″ 7/16″ 7/16″ ZD 0.18
P1063 3/8″ 7/16″ 7/16″ SS 0.18
P1063 3/8″ 7/16″ 7/16″ ST 0.18
P1063 3/8″ 7/16″ 7/16″ AL 0.06
P1064 1/2″ 9/16″ 9/16″ EG 0.17
P1064 1/2″ 9/16″ 9/16″ DF 0.18
P1064 1/2″ 9/16″ 9/16″ HG 0.18
P1064 1/2″ 9/16″ 9/16″ GR 0.17
P1064 1/2″ 9/16″ 9/16″ ZD 0.17
P1064 1/2″ 9/16″ 9/16″ SS 0.17
P1064 1/2″ 9/16″ 9/16″ ST 0.17
P1064 1/2″ 9/16″ 9/16″ AL 0.06
P1964 5/8″ 11/16″ 11/16″ EG 0.16
P1964 5/8″ 11/16″ 11/16″ HG 0.17
P1964 5/8″ 11/16″ 11/16″ ZD 0.16
P1964 5/8″ 11/16″ 11/16″ SS 0.18
P1964 5/8″ 11/16″ 11/16″ ST 0.18
P2471 3/4″ 13/16″ 13/16″ EG 0.15
P2471 3/4″ 13/16″ 13/16″ HG 0.159
P2471 3/4″ 13/16″ 13/16″ SS 0.15
P2490 7/8″ 15/16″ 15/16″ EG 0.14
P2490 7/8″ 15/16″ 15/16″ HG 0.17

Standard Dimensions (Unless Shown Otherwise on Drawing):

  • Hole Diameter:  9/16”  (14mm)
  • Hole Spacing (From End):  13/16”  (21mm)
  • Hole Spacing (On-Center):  1 7/8”  (48mm)
  • Width:  1 5/8”  (41mm)
  • Thickness:
    • 1/4”  (6.4mm) with steel meeting or exceeding ASTM A1011 SS GR 33, or
    • 0.220″ (5.6mm) with steel meeting or exceeding ASTM A1011 HSLAS GR 45

Note:

When used for mechanical supports, load capacities of brackets and fittings should be in compliance with the American Standard Code for Pressure Piping.

 

Materials & Finishes – Standard:

  • Base Metal: Steel conforms to ASTM A1011 SS GR 33, A1011 HSLAS GR 45, A36, A575, A576, or A635.
  • Electrogalvanized (EG):  Conforms to ASTM B633, Type III SC1
  • Unistrut Defender (DF):  Conforms to ASTM A1059
  • Hot Dip Galvanized (HG):  Conforms to ASTM A123 or A153
  • Perma-Green (GR):  Conforms to commercial standards for powder coating
  • Perma-Gold (ZD):  Conforms to ASTM B633, Type II SC1 or SC3
  • Plain (PL):  No finish

Materials & Finishes – Special Metals:

  • Stainless Steel, Type 304 (SS):  Conforms to ASTM A240 or A276, Type 304 *
  • Stainless Steel, Type 316 (ST):  Conforms to ASTM A240 or A276, Type 316 *
  • Aluminum (AL):  Conforms to ASTM B209, Type 1100F or 5052-H32 *

* These materials have different physical properties and performance characteristics. Please contact us for design support.

Scroll to Top