Strut Services Group, Inc.

Unistrut Alabama

P1654A-P1661A

SKU P1654A-P1661A Categories ,
$

P1654A / P1655A/ P1656A / P1657A / P1658A / P1659A / P1660A / P1661A
Beam Clamp (1-5/8″ Series)

 

Part No. Use With Flange Width A Finish Product Weight / Piece (lbs)
P1654A P2675 6″ 7 (178) HG 0.273
P1654A P2675 6″ 7 (178) GR 0.26
P1655A P2675 9″ 10 (254) HG 0.368
P1655A P2675 9″ 10 (254) GR 0.35
P1656A P1648S Thru P1651S, P2398S, P2401S & P2403S 6″ 9 (229) HG 0.392
P1656A P1648S Thru P1651S, P2398S, P2401S & P2403S 6″ 9 (229) GR 0.37
P1657A P1648S Thru P1651S, P2398S, P2401S & P2403S 9″ 12 (305) EG 0.34
P1657A P1648S Thru P1651S, P2398S, P2401S & P2403S 9″ 12 (305) HG 0.523
P1657A P1648S Thru P1651S, P2398S, P2401S & P2403S 9″ 12 (305) GR 0.49
P1658A P1648S Thru P1651S, P2398S, P2401S & P2403S 12″ 15 (381) EG 0.44
P1658A P1648S Thru P1651S, P2398S, P2401S & P2403S 12″ 15 (381) HG 0.653
P1658A P1648S Thru P1651S, P2398S, P2401S & P2403S 12″ 15 (381) GR 0.61
P1659A P2676 6″ 9 (229) HG 0.392
P1659A P2676 6″ 9 (229) GR 0.37
P1660A P2676 9″ 12 (305) HG 0.523
P1660A P2676 9″ 12 (305) GR 0.49
P1661A P2676 12″ 15 (381) HG 0.653
P1661A P2676 12″ 15 (381) GR 0.653
Standard Lengths:
  • 10 feet: 10′ or 10’ 1/8” (3.05m) ± 1/8″ (3 mm)
  • 20 feet: 20′ or 20’ 3/8” (6.11m) ± 1/8″ (3 mm)
Special Lengths:
  • Available with a tolerance of ±1/8″ (3 mm). Request quote.
Curved Channel:
  • Many Unistrut channel sections can be supplied with a curve. Contact us for our ordering form, specifications, and instructions.
Load Data:
  • All beam and column load data pertains to carbon steel and stainless steel channels.
  • Load tables apply only to UNISTRUT brand channel. Look for “UNISTRUT” on the product.
  • Load tables and charts are constructed to be in accordance with the SPECIFICATION FOR THE DESIGN OF COLD-FORMED STEEL STRUCTURAL MEMBERS 2007 EDITION published by the AMERICAN IRON AND STEEL INSTITUTE USING ASD METHOD.
  • Loads are based on 33 ksi steel cold formed to 42 ksi.
  • Safety Factor to Yield Strength is 1.67 for Beam Loads and 1.80 for Column Loads.
  • Beam loads are based on a simple beam and are given as a total uniform load (W) in pounds. For proper calculation procedures, refer to our Beam Load Calculation Guide.
  • For bearing loads, reference our bearing loads page.
Welds:
  • Welded channels are spot welded 2″ (51 mm) or 3″ (76 mm) on-center.

Materials & Finishes – Standard:

  • Base Metal: Steel conforms to ASTM A1011 SS GR 33, A1011 HSLAS GR 45, A36, A575, A576, or A635.
  • Electrogalvanized (EG):  Conforms to ASTM B633, Type III SC1
  • Unistrut Defender (DF):  Conforms to ASTM A1059
  • Hot Dip Galvanized (HG):  Conforms to ASTM A123 or A153
  • Perma-Green (GR):  Conforms to commercial standards for powder coating
  • Perma-Gold (ZD):  Conforms to ASTM B633, Type II SC1 or SC3
  • Plain (PL):  No finish

Materials & Finishes – Special Metals:

  • Stainless Steel, Type 304 (SS):  Conforms to ASTM A240 or A276, Type 304 *
  • Stainless Steel, Type 316 (ST):  Conforms to ASTM A240 or A276, Type 316 *
  • Aluminum (AL):  Conforms to ASTM B209, Type 1100F or 5052-H32 *

* These materials have different physical properties and performance characteristics. Please contact us for design support.

Scroll to Top