Strut Services Group, Inc.

Unistrut Alabama

P2008-P2020

$

P2008 / P2009 / P2010 / P2012 / P2014 / P2016 / P2018 / P2020 
One Hole O.D. Tubing Clamp

Part No. O.D. Size Finish Product Weight / Piece (lbs)
P2008 1/4″ (6.4) EG 0.04
P2008 1/4″ (6.4) HG 0.042
P2008 1/4″ (6.4) SS 0.04
P2009 5/16″ (7.9) EG 0.05
P2009 5/16″ (7.9) HG 0.053
P2009 5/16″ (7.9) SS 0.05
P2010 3/8″ (9.5) EG 0.05
P2010 3/8″ (9.5) HG 0.053
P2010 3/8″ (9.5) SS 0.05
P2012 1/2″ (12.7) EG 0.06
P2012 1/2″ (12.7) HG 0.064
P2012 1/2″ (12.7) SS 0.06
P2014 5/8″ (15.9) EG 0.08
P2014 5/8″ (15.9) HG 0.085
P2014 5/8″ (15.9) SS 0.08
P2016 3/4″ (19.1) EG 0.09
P2016 3/4″ (19.1) HG 0.095
P2016 3/4″ (19.1) SS 0.09
P2018 7/8″ (22.2) EG 0.1
P2018 7/8″ (22.2) HG 0.106
P2018 7/8″ (22.2) SS 0.1
P2020 1″ (25.4) EG 0.11
P2020 1″ (25.4) HG 0.117
P2020 1″ (25.4) SS 0.11

Note: When tightening 1/4″ screws used with a two piece pipe clamp, a torque of 5 ft-lbs (60 in-lbs) should be used.

Material:

  • The steel meets or exceeds the physical properties of ASTM A1011 GR 33, except with SS, ST & AL finishes.

Finishes:

  • Electrogalvanized (EG):  Conforms to ASTM B633, Type III SC1
  • Unistrut Defender (DF):  Conforms to ASTM A1059
  • Hot Dip Galvanized (HG):  Conforms to ASTM A123 or A153
  • Perma-Gold (ZD):  Conforms to ASTM B633, Type II SC1 or SC3
  • Everdur (E EG): TBD
  • Stainless Steel, Type 304 (SS):  ASTM A240, Type 304 *
  • Stainless Steel, Type 316 (ST):  ASTM A240, Type 316 *
  • Aluminum (AL): TBD

* These materials have different physical properties and performance characteristics. Please contact us for design support.

Material & Finish Combinations:

 

Material / Finish
Part Number
Suffix
Pipe Clamp
Material / Finish
Fasteners (Screw & Nut)
Material / Finish
Example
Electro-galvanized
EG
EG
EG
P1109 EG
Hot-dipped galvanized
HG
HG
SS
P1109 HG
Unistrut Defender
DF
DF
DF
P1109 DF
Stainless Steel Type 304
SS
SS
SS
P1109 SS
Stainless Steel Type 316
ST
ST
SS
P1109 ST
Aluminum
AL
AL
AL
P1109 AL
Copper Coated
CC
CC
CC
P1109 CC
Everdur
E EG
EG
E
P1109E EG

 

P2008 thru P2020
Allowable (Design) Loads
(lbs)
Pullout Slip Along Slip Thru
40 30 0

Notes:

Design loads only apply to UNISTRUT brand products. Look for “UNISTRUT” on the part.

Design loads are based on static testing with a safety factor = 5 based on ultimate strength of connection.

Appropriate Unistrut Bolt and Channel Nut required for connection to strut.

Scroll to Top