Strut Services Group, Inc.

Unistrut Alabama

P2260-P2270

$

P2260 / P2261 / P2262 / P2263 / P2264 / P2265 / P2266 / P2267 / P2268 / P2269 /  P2270
4 Hole, Outside Angle Fitting (1-5/8″ Series)

Part No. A B Finish Product Weight / Piece (lbs)
P2260 7-1/2° 3-3/4″ (95) EG 0.78
P2260 7-1/2° 3-3/4″ (95) HG 0.78
P2260 7-1/2° 3-3/4″ (95) GR 0.78
P2261 15° 3-3/4″ (95) EG 0.78
P2261 15° 3-3/4″ (95) HG 0.78
P2261 15° 3-3/4″ (95) GR 0.78
P2262 22-1/2° 3-3/4″ (95) EG 0.78
P2262 22-1/2° 3-3/4″ (95) HG 0.78
P2262 22-1/2° 3-3/4″ (95) GR 0.78
P2263 30° 3-11/16″ (94) EG 0.78
P2263 30° 3-11/16″ (94) HG 0.78
P2263 30° 3-11/16″ (94) GR 0.78
P2264 37-1/2° 3-11/16″ (94) EG 0.78
P2264 37-1/2° 3-11/16″ (94) HG 0.78
P2264 37-1/2° 3-11/16″ (94) GR 0.78
P2265 45° 3-11/16″ (94) EG 0.78
P2265 45° 3-11/16″ (94) DF 0.78
P2265 45° 3-11/16″ (94) HG 0.78
P2265 45° 3-11/16″ (94) GR 0.78
P2266 52-1/2° 3-11/16″ (94) EG 0.78
P2266 52-1/2° 3-11/16″ (94) HG 0.78
P2266 52-1/2° 3-11/16″ (94) GR 0.78
P2267 60° 3-11/16″ (94) EG 0.78
P2267 60° 3-11/16″ (94) HG 0.78
P2267 60° 3-11/16″ (94) GR 0.78
P2268 67-1/2° 3-5/8″ (91) EG 0.78
P2268 67-1/2° 3-5/8″ (91) HG 0.78
P2268 67-1/2° 3-5/8″ (91) GR 0.78
P2269 75° 3-5/8″ (91) EG 0.78
P2269 75° 3-5/8″ (91) HG 0.78
P2269 75° 3-5/8″ (91) GR 0.78
P2270 82-1/2° 3-5/8″ (91) EG 0.78
P2270 82-1/2° 3-5/8″ (91) HG 0.78
P2270 82-1/2° 3-5/8″ (91) GR 0.78

Standard Dimensions (Unless Shown Otherwise on Drawing):

  • Hole Diameter: 9/16″ (14mm)
  • Hole Spacing (From End): 13/16″ (21mm)
  • Hole Spacing (On-Center): 1 7/8″ (48mm)
  • Width: 1 5/8″ (41mm)
  •  Thickness:
    • 1/4″ (6.4mm) with steel meeting or exceeding ASTM A1011 SS GR 33, or
    • 0.220″ (5.6mm) with steel meeting or exceeding ASTM A1011 HSLAS GR 45

Note:

When used for mechanical supports, load capacities of brackets and fittings should be in compliance with the American Standard Code for Pressure Piping.

Materials & Finishes – Standard:

  • Base Metal: Steel conforms to ASTM A1011 SS GR 33, A1011 HSLAS GR 45, A36, A575, A576, or A635.
  • Electrogalvanized (EG):  Conforms to ASTM B633, Type III SC1
  • Unistrut Defender (DF):  Conforms to ASTM A1059
  • Hot Dip Galvanized (HG):  Conforms to ASTM A123 or A153
  • Perma-Green (GR):  Conforms to commercial standards for powder coating
  • Perma-Gold (ZD):  Conforms to ASTM B633, Type II SC1 or SC3
  • Plain (PL):  No finish

Materials & Finishes – Special Metals:

  • Stainless Steel, Type 304 (SS):  Conforms to ASTM A240 or A276, Type 304 *
  • Stainless Steel, Type 316 (ST):  Conforms to ASTM A240 or A276, Type 316 *
  • Aluminum (AL):  Conforms to ASTM B209, Type 1100F or 5052-H32 *

* These materials have different physical properties and performance characteristics. Please contact us for design support.

Scroll to Top