Strut Services Group, Inc.

Unistrut Alabama

P2500-P2503

SKU P2500-P2503 Categories ,
$

P2500 / P2501 /  P2502 / P2503
24″ to 30″ Bracket (1-5/8″ Series)

Part No. Nom. Pipe Size A B Finish Product Weight / Piece (lbs)
P2500L 24″ (610) 24″ (610) 6-7/16″ (164) HG 4.24
P2500L 24″ (610) 24″ (610) 6-7/16″ (164) GR 4
P2500R 24″ (610) 24″ (610) 6-7/16″ (164) HG 4.24
P2500R 24″ (610) 24″ (610) 6-7/16″ (164) GR 4
P2501L 26″ (660) 26″ (660) 6-15/16″ (176) HG 4.72
P2501L 26″ (660) 26″ (660) 6-15/16″ (176) GR 4.45
P2501R 26″ (660) 26″ (660) 6-15/16″ (176) HG 4.72
P2501R 26″ (660) 26″ (660) 6-15/16″ (176) GR 4.45
P2502L 28″ (711) 28″ (711) 7-7/16″ (189) HG 5.23
P2502L 28″ (711) 28″ (711) 7-7/16″ (189) GR 4.93
P2502R 28″ (711) 28″ (711) 7-7/16″ (189) HG 5.23
P2502R 28″ (711) 28″ (711) 7-7/16″ (189) GR 4.93
P2503L 30″ (762) 30″ (762) 7-15/16″ (202) HG 5.78
P2503L 30″ (762) 30″ (762) 7-15/16″ (202) GR 5.45
P2503R 30″ (762) 30″ (762) 7-15/16″ (202) HG 5.78
P2503R 30″ (762) 30″ (762) 7-15/16″ (202) GR 5.45

Standard Dimensions (Unless Shown Otherwise on Drawing):

  • Hole Diameter:  9/16”  (14mm)
  • Hole Spacing (From End):  13/16”  (21mm)
  • Hole Spacing (On-Center):  1 7/8”  (48mm)
  • Width:  1 5/8”  (41mm)
  • Thickness:
    • 1/4”  (6.4mm) with steel meeting or exceeding ASTM A1011 SS GR 33, or
    • 0.220″ (5.6mm) with steel meeting or exceeding ASTM A1011 HSLAS GR 45

Note:

When used for mechanical supports, load capacities of brackets and fittings should be in compliance with the American Standard Code for Pressure Piping.

Materials & Finishes – Standard:

  • Base Metal: Steel conforms to ASTM A1011 SS GR 33, A1011 HSLAS GR 45, A36, A575, A576, or A635.
  • Electrogalvanized (EG):  Conforms to ASTM B633, Type III SC1
  • Unistrut Defender (DF):  Conforms to ASTM A1059
  • Hot Dip Galvanized (HG):  Conforms to ASTM A123 or A153
  • Perma-Green (GR):  Conforms to commercial standards for powder coating
  • Perma-Gold (ZD):  Conforms to ASTM B633, Type II SC1 or SC3
  • Plain (PL):  No finish

Materials & Finishes – Special Metals:

  • Stainless Steel, Type 304 (SS):  Conforms to ASTM A240 or A276, Type 304 *
  • Stainless Steel, Type 316 (ST):  Conforms to ASTM A240 or A276, Type 316 *
  • Aluminum (AL):  Conforms to ASTM B209, Type 1100F or 5052-H32 *

* These materials have different physical properties and performance characteristics. Please contact us for design support.

Notes:

Safety factor = 2.5 based on the ultimate strength of the connection.

Scroll to Top