Strut Services Group, Inc.

Unistrut Alabama

P2815

$

P2815 – Adjustable Brace Fitting

Part No. Finish Product Weight / Piece (lbs)
P2815 EG 3.07
P2815 HG 3.25
P2815 GR 3.07
P2815 ZD 3.07

Standard Dimensions (Unless Shown Otherwise on Drawing):

  • Hole Diameter: 9/16″ (14mm)
  • Hole Spacing (From End): 13/16″ (21mm)
  • Hole Spacing (On-Center): 1 7/8″ (48mm)
  • Width: 1 5/8″ (41mm)
  •  Thickness:
    • 1/4″ (6.4mm) with steel meeting or exceeding ASTM A1011 SS GR 33, or
    • 0.220″ (5.6mm) with steel meeting or exceeding ASTM A1011 HSLAS GR 45

Note:

When used for mechanical supports, load capacities of brackets and fittings should be in compliance with the American Standard Code for Pressure Piping.

Materials & Finishes – Standard:

  • Base Metal: Steel conforms to ASTM A1011 SS GR 33, A1011 HSLAS GR 45, A36, A575, A576, or A635.
  • Electrogalvanized (EG):  Conforms to ASTM B633, Type III SC1
  • Unistrut Defender (DF):  Conforms to ASTM A1059
  • Hot Dip Galvanized (HG):  Conforms to ASTM A123 or A153
  • Perma-Green (GR):  Conforms to commercial standards for powder coating
  • Perma-Gold (ZD):  Conforms to ASTM B633, Type II SC1 or SC3
  • Plain (PL):  No finish

Materials & Finishes – Special Metals:

  • Stainless Steel, Type 304 (SS):  Conforms to ASTM A240 or A276, Type 304 *
  • Stainless Steel, Type 316 (ST):  Conforms to ASTM A240 or A276, Type 316 *
  • Aluminum (AL):  Conforms to ASTM B209, Type 1100F or 5052-H32 *

* These materials have different physical properties and performance characteristics. Please contact us for design support.

 

Design Loads – P2815
Load Angle  Average Ultimate Load
(lbs)
 Design Load
(lbs)
Tension 30° 10,600  3,000
45° 9,840
60° 10,400
Compression 90° 10,380

Notes:

Design loads only apply to UNISTRUT brand products. Look for “UNISTRUT” on the part.

Average Safety Factor = 3.0 based on static testing to the ultimate strength of connection. Design Loads are limited to 3,000 lbs for the Slip Load of (2) Channel Nuts with a Safety Factor = 3.0.

1/2″ Unistrut Channel Nut and Cap Screw torqued to 50 ft-lbs required for installation.

Scroll to Top